DS18 subwoofer 10" white with LED / NXL-10SUB/WH
DS18 NXL-10SUB
10" Marine Water-Resistant Subwoofer with Integrated RGB LEDs – 600W SVC 4-Ohm
Experience powerful, deep bass and outstanding sound quality with the DS18 NXL-10SUB , a specially designed for Marine sector and Outdoor use developed subwoofer. With its IP65 certification This 10-inch subwoofer is Water, salt spray and extreme weather conditions and offers reliable performance in any environment – whether on the boat, off-roading or other outdoor adventures.
The NXL-10SUB is known not only for its impressive longevity, but also for its integrated RGB LED lighting that gives your audio system a unique visual dynamic. It can be easily connected to a RGB 4-wire system to create a customized color experience that perfectly matches your boat or vehicle. For optimal control and customization, we recommend using the DS18 LED-BTC Controllers (sold separately).
With a single 4-ohm voice coil and a robust 2-inch voice coil support construction delivers the NXL-10SUB one RMS power of 300W and a maximum power of 600W , so you powerful, clear and precise bass Thanks to its powerful Ferrite magnets and the UV-resistant membrane The bass quality remains powerful and distortion-free even under demanding conditions.
This subwoofer is suitable for both closed as well as for Bass reflex cabinet designed to achieve optimal sound results in any configuration. Its UV-resistant, marine-grade construction ensures a long service life and consistently high performance, even with intensive use on the water.
With the DS18 NXL-10SUB Take your marine sound system to a new level and experience powerful, thrilling bass combined with spectacular LED lighting effects – for an unforgettable sound experience on the water.
Technical data
| General specifications | |
|---|---|
| Nominal diameter | 10" (254 mm) |
| Nominal impedance | 4 ohms |
| RMS power | 300 watts |
| Maximum load capacity | 600 watts |
| Sensitivity (1W/1m) | 89 dB |
| Frequency response | 35 - 250 Hz |
| Recommended low-pass crossover | 100 Hz |
| Housing properties | |
| UV resistance | Yes, 100% UV-stable |
| Marine suitability | IP65 |
| RGB LED | Integrated |
| Grid type | Composite with 316 stainless steel mesh |
| Sales unit | Unique piece |
| Woofer specifications | |
| Voice coil diameter | 2" (50.8 mm) |
| Voice coil former material | Fiber optic |
| Winding material | CCAW |
| Membrane material | Polypropylene (UV-resistant) |
| Beading material | Butyl (rubber) |
| Basket material | High-temperature composite with UV protection |
| Magnetic material | ferrite |
| Magnetic weight | 2.1 kg |
| Thiele & Small Parameter | |
| Equivalent volume (Vas) | 26.7 L (0.94 ft³) |
| Deflection (one-sided) (Vmax) | 12.5mm |
| Free-air resonance (Fs) | 45 Hz |
| Mechanical quality factor (Qms) | 8,919 |
| Electrical quality factor (Qes) | 0.805 |
| Overall quality factor (Qts) | 0.738 |
| Moving mass (Mms) | 73,229 g |
| Compliance (Cms) | 0.171 mm/N |
| Bl factor (Bl) | 9.68 |
| Voice coil inductance (Le) | 1.8418 mH |
| Membrane area (Sd) | 333.29 cm² |
| DC resistance (Re) | 3.65 ohms |
| Efficiency bandwidth product (EBP) | 55.9 |
| Recommended enclosures | |
| Closed housing | 0.017 m³ - 0.057 m³ (0.6 - 2 ft³) |
| Output frequency (F3) | 64 - 45 Hz |
| Outdoor/baffle mounting | Yes, recommended |
| Dimensions | |
| Total diameter | 10.76" (273.3 mm) |
| Total depth | 6.73" (171 mm) |
| Installation cutout | 8.78" (223 mm) |
| Mounting depth | 5" (127.5 mm) |
| Engine diameter | 5.51" (140 mm) |