Railblaza Ribport with Cleatport
CleatPort – cleat & accessory holder in one!
An ingenious yet simple idea – and incredibly effective! From now on, you can not only attach a rod or other accessories to your CleatPort , but also use the cleat function at the same time – without them getting in each other's way .
Flexible & easy to install
This Railblaza mount was specially developed for inflatable and belly boats and is easy to attach:
✔ With the Mr. Kraken glue kit – perfect for the boat skin, extra strong hold.
✔ With 3M VHB double adhesive – Ideal for hard, smooth surfaces such as wood, GRP or aluminum.
For maximum adhesive performance, we recommend Mr. Kraken glue!
Cleat & bracket cleverly combined
🔹 Secure your boat – Use the cleat to securely tie your boat to the dock.
🔹 No loss of space – accessories can still be easily mounted.
🔹 Perfect height – The mount sits slightly higher than the RibPort for extra comfort.
Fits on almost any surface
Suitable for PVC, Hypalon, fiberglass, epoxy resin, and polyethylene (e.g., kayaks). For Hypalon, you'll also need Hypalon glue.
Clever design for easy handling
Thanks to the star-shaped mount and the Hold 'n' Lock system, you can securely attach Railblaza accessories and swap them out at any time. With our mounting kit, installation is a breeze!
How to glue your mount – step by step
With the Mr. Kraken Glue Kit, installation is a breeze. The set includes everything you need: workshop glue, thinner, electrical tape, and a brush. You'll also need a heat gun and a soluble pen.
1. Mark & Prepare
📍 Mark the desired location with a soluble pen.
📍 Cover the area with insulating tape – slightly larger than the bracket.
📍 Clean and dry the bonding area thoroughly.
2. Apply glue
🖌 Open the PVC glue and dilute it if necessary.
🖌 Apply a first coat to both surfaces – from the inside out for clean edges.
🖌 Let the glue dry for 15-20 minutes , then apply a second coat.
3. Activate & Glue
🔥 Heat both adhesive areas with a hot air gun (30 seconds) – do not hold it in one place for too long!
🔥 Press the mount directly onto the surface – it sticks instantly!
🔥 Roll over with a roller or bottle to avoid air bubbles.
4. Let it dry
⏳ Allow to cure for 1-2 days before rolling up the boat or putting any weight on it.