Railblaza Quikport
QuickPort – The compact Railblaza mount for your boat!
This mount was specially developed for inflatable and belly boats and allows you to easily and flexibly attach Railblaza accessories – without drilling!
Easy installation – two options
✔ With the Mr. Kraken – Perfect for the boat skin, extra strong hold.
✔ With 3M VHB double adhesive – Ideal for hard, smooth surfaces such as wood, GRP or aluminum.
For maximum adhesive performance we recommend the glue Mr. Kraken!
🔹 Smaller & flatter than the RibPort – ideal for tight spaces (only 90 mm Ø).
🔹 Cheaper than the RibPort – perfect for low-load accessories.
🔹 Slightly less grip – ideal for light items such as mobile phone holders or position lights .
📌 Our tip:
✔ For lightweight accessories → Select QuickPort.
✔ For holders subject to heavy loads (e.g. rod holders, paddle holders) → use RibPort.
Secure hold for your Railblaza accessories
Thanks to the star-shaped mount with Hold 'n' Lock system, you can easily attach and replace Railblaza accessories.
Compatible with many surfaces
Suitable for PVC, Hypalon, fiberglass, epoxy resin, and polyethylene (e.g., kayaks). For Hypalon, you'll also need Hypalon glue.
Technical details
📏 Diameter: 90 mm (3.5")
How to glue your mount – step by step
With the Mr. Kraken Glue Kit, installation is a breeze. The set includes everything you need: workshop glue, thinner, electrical tape, and a brush. You'll also need a heat gun and a soluble pen.
1. Mark & Prepare
📍 Mark the desired location with a soluble pen.
📍 Cover the area with insulating tape – slightly larger than the bracket.
📍 Clean and dry the bonding area thoroughly.
2. Apply glue
🖌 Open the PVC glue and dilute it if necessary.
🖌 Apply a first coat to both surfaces – from the inside out for clean edges.
🖌 Let the glue dry for 15-20 minutes , then apply a second coat.
3. Activate & Glue
🔥 Heat both adhesive areas with a hot air gun (30 seconds) – do not hold it in one place for too long!
🔥 Press the mount directly onto the surface – it sticks instantly!
🔥 Roll over with a roller or bottle to avoid air bubbles.
4. Let it dry
⏳ Allow to cure for 1-2 days before rolling up the boat or putting any weight on it.