DS18 subwoofer 12" white with LED NXL-10SUB/WH
DS18 NXL-12SUB
NXL 12" Marine Subwoofer with Integrated RGB LEDs – 350W RMS SVC 4-Ohm
The DS18 NXL-12SUB is specifically designed for marine applications, delivering exceptional bass performance with impressive durability and a stylish design. Thanks to its IP65 certification, this 12-inch subwoofer is fully protected against water, salt spray, and extreme weather conditions, making it perfect for boats, yachts, and other marine applications.
With a larger cone area, higher power handling, and an extended frequency range, the NXL-12SUB sets new standards in marine audio. Building on the success of its 10-inch predecessor, this 12-inch version offers even deeper, more powerful bass and an impressive 350W RMS power output, taking your sound system to the next level.
This subwoofer is optimized for closed and bass-reflex enclosures, but can also be used as a free-air subwoofer. Regardless of the installation location, the NXL-12SUB delivers powerful bass reproduction that is impressive even in open waterscapes with high ambient noise.
Another highlight is the integrated RGB LED lighting, which allows for a personalized visual design of your sound system. With vibrant, customizable colors, your boat will be a real eye-catcher not only acoustically but also visually. For precise control of the lighting effects, we recommend the DS18 LED-BTC Controller (sold separately).
The NXL-12SUB features a Y35 ferrite magnet and a reverse N40H neodymium magnet for powerful, precise bass reproduction. With a sensitivity of 91dB and a frequency range of 30Hz – 500Hz, this subwoofer delivers powerful, deep bass with impressive clarity and dynamics.
Manufactured with a high-quality, heat-resistant injection-molded construction, the NXL-12SUB impresses not only with its sound quality but also with its resistance to extreme conditions.
Increase the performance of your marine sound system with the DS18 NXL-12SUB and experience superior bass power, impressive lighting effects and maximum durability for your boat or watersports vehicle.
DS18 NXL-12SUB
Technical data
| General specifications | |
|---|---|
| Nominal diameter | 12.81" (325.3mm) |
| Nominal impedance | 4 ohms |
| RMS power | 350 watts |
| Maximum load capacity | 700 watts |
| Sensitivity (1W/1m) | 91 dB |
| Frequency response | 30 - 200 Hz |
| Recommended low-pass crossover | 80 Hz |
| Housing properties | |
|---|---|
| UV resistance | Yes, 100% UV-stable |
| Marine suitability | IP65 |
| RGB LED | Integrated |
| Grid type | Composite with 316 stainless steel mesh |
| Sales unit | Unique piece |
| Woofer specifications | |
|---|---|
| Voice coil diameter | 2" (50.8 mm) |
| Voice coil former material | Fiber optic |
| Winding material | CCAW |
| Membrane material | Polypropylene (UV-resistant) |
| Beading material | Butyl (rubber) |
| Basket material | High-temperature composite with UV protection |
| Magnetic material | Y35 Ferrite + N40H Neodymium |
| Magnetic weight | 2.1kg |
| Thiele & Small Parameter | |
|---|---|
| Equivalent volume (Vas) | 68.8L (2.42ft³) |
| Deflection (Vmax) | 10mm |
| Free-air resonance (Fs) | 32 Hz |
| Mechanical quality factor (Qms) | 7.85 |
| Electrical quality factor (Qes) | 0.58 |
| Overall quality factor (Qts) | 0.54 |
| Moving mass (Mms) | 131.59g |
| Compliance (Cms) | 0.19 mm/N |
| Bl factor (Bl) | 12.76 |
| Voice coil inductance (Le) | 0.89mH |
| Membrane area (Sd) | 510.7 cm³ |
| DC resistance (Re) | 4.15 ohms |
| Efficiency bandwidth product (EBP) | 55.1 |
| Recommended enclosures | |
|---|---|
| type | volume |
| Closed housing | 0.6~2ft³ |
| Output frequency (F3) | 60~35Hz |
| Outdoor/baffle mounting | Yes, recommended |
| Dimensions | |
|---|---|
| Total diameter | 12.81" (325.3 mm) |
| Total depth | 7.68" (195 mm) |
| Installation cutout | 10.71" (272 mm) |
| Mounting depth | 5.75" (146 mm) |
| Engine diameter | 5.51" (140 mm) |